Flow Notifications

…go to the controller settings and turn on the notifications for High Flow Alarm and Low Flow Alarm. Once notifications are turned on, and a flow event is detected, then…

ESP-ME3 Troubleshooting

If a High Flow condition is detected, a “High Flow Alarm” is shown at the display and the red alarm LED comes on. To clear the alarm press the “Hold…

FG100 Setup in the Rain Bird App

…Time Settling Time is the time (from 1-10 minutes) that a flow rate must remain at or above the High Flow Threshold or below the Low Flow Threshold before the…

How does Flow Detection work

High Flow If the FG100 detects a flow exceeding 130% of the Learned Flow, automatic irrigation is shut off station by station, and an alarm is activated. The threshold and…

RC2 Controller

…Version 2.0 (the “License”); you may not use this file except in compliance with the License. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable…

ARC8 Controller

…Version 2.0 (the “License”); you may not use this file except in compliance with the License. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable…

Rain Sensors and WiFi Controllers

…https://www.rainbird.com/products/wr2-wr2-48-series-wireless-rainfreeze-sensors To install a rain sensor remove the yellow jumper wire from the terminals marked “SENS”.  Connect both rain sensor wires to the rain sensor terminals per the rain sensor…