Search Results for: rain sensor
How to Use Rain Sensors with WiFi Controllers
…https://www.rainbird.com/products/wr2-wr2-48-series-wireless-rainfreeze-sensors To install a rain sensor remove the yellow jumper wire from the terminals marked “SENS”. Connect both rain sensor wires to the rain sensor terminals per the rain sensor…
My WiFi Controller Watered After Rain, Even with a Rain Sensor
…Watering in the app for up to 14 days. If your rain sensor does not prevent irrigation after a heavy rainfall, it could be that: (1) Your rain sensor may…
How to Set up Automatic Seasonal Adjust in the Rain Bird 1.0 App
…Adjust Applied > toggle to ON to activate. Can I use a rain or rain/freeze sensor and Automatic Seasonal Adjust at the same time? A local rain or rain/freeze sensor…
How to Connect a Rain or Freeze Sensor to the RC2 Controller
…rain or rain/freeze sensor is not connected. Rain Bird controllers are only compatible with sensors marketed as rain/freeze sensors. Check local and/or state regulations to determine if a rain or…
How to Set up the FG100 Flow Sensor
…more than 30%. When set to Sensor OFF, all stations will ignore the flow sensor. When switching from Sensor OFF to Sensor ON, the controller will begin to LEARN FLOW…
RC2/ARC Series WiFi Smart Controller: Watering Issues
…a rain sensor is activated. Let the rain sensor dry out, or disconnect it from the controller terminal block and replace it with a jumper wire connecting the two SENS…
How to Enable Automatic Rain Delay in Rain Bird 1.0 App
Ever regret not checking the weather before leaving home? It’s raining now, and your sprinklers are scheduled to run. What do you do? While a rain sensor would provide you…
How Does Flow Detection Work with FG100 Flow Sensor and ESP-ME3 Controller
…behavior can be adjusted from within the Rain Bird app. Flow Sensor Detects Low Flow If your flow sensor detects flow below 70% of the Learned Flow then automatic irrigation…
Setting up FG100 in the Rain Bird 1.0 App
…Bird app select the Controller Settings icon expand the Flow Sensor Settings screen, make sure Flow Sensor Installed is checked. Select Change Flow Settings set the Sensor Type to Rain…
ESP-BAT-BT – Quick Start Guide
…it up. Master Valve (Optional) Connect the orange master valve ‘M’ and black common ‘C’ wire as shown. Rain Sensor (Optional) Connect the sensor wires ‘S’ to a compatible sensor…