Help Articles Device Help How Does Flow Detection Work With FG100 Flow Sensor and ESP-ME3 Controller

Topic(s): Device HelpESP-ME3FG100 Flow Sensor

How Does Flow Detection Work With FG100 Flow Sensor and ESP-ME3 Controller

Feature Overview

The features described here refer to functionality of the ESP-ME3 controller. Some features require the ESP-ME3 to be connected to the Rain Bird app using the LNK2. Flow sensing features will vary by controller. Please refer to the documentation of your specific controller.

Learn Flow

Rain Bird controllers use Learn Flow technology to establish a baseline expected flow rate for each station. The controller does this by running each station for several minutes when you first set up the FG100 and recording the flow data.

Flow Sensor Detects High Flow

If the FG100 detects a flow exceeding 130% of the Learned Flow, automatic irrigation is shut off station by station, and an alarm is activated. The threshold and behavior can be adjusted from within the Rain Bird app.

Flow Sensor Detects Low Flow

If your flow sensor detects flow below 70% of the Learned Flow then automatic irrigation will be shut off by station, and an alarm will be activated. The threshold and behavior can be adjusted from within the Rain Bird app.

Was this helpful?

Do you have suggestions to make this article more helpful?

Your feedback will be used to improve this and other articles. If you would like to receive direct help please contact our Live Support at the number below. If you would like to receive a notification of article updates based on your feedback please provide your email address in the comments. Your email address will not be published.


Thank you for your feedback. We regret we are not able to provide direct responses.