Setup ESP-ME3 When set to Sensor ON, automatic irrigation will be suspended per station if detected flow exceeds learned flow by more than 30%. When set to Sensor OFF, all stations will ignore the flow sensor. When switching from Sensor OFF to Sensor ON, the controller will begin to LEARN FLOW It will run each […]
Device Setup
FG100 Flow Sensor
LNK2™ WiFi Module User Guide
Setting up Your LNK2 WiFi Module
Rain Bird RC2 Controller Guest Mode for Installers
Rain Bird RC2 Controller – Advanced Features
Rain Bird® RC2 Controller – Hassle-Free Set-Up
Rain Bird puts the user top-of-mind to make set-up easy. Following a few simple prompts, you can unlock the power of the RC2 after it’s connected to a WiFi Network. This video will walk you through each step and show you how easy it is.
Rain Bird® RC2 Controller – Intro to RC2
The connected home is here, and homeowners have adopted everything from doorbells, thermostats, garage door openers, lighting, and security. With the Rain Bird RC2, homeowners and contractors can benefit from adding irrigation to a connected home. Watch this to learn what the RC2 is all about!
Extending the Range of the LNK WiFi Module’s AP Hotspot Without Using a Local WiFi Network
You can boost the signal of the LNK WiFi Module’s Hotspot to extend its range using a commercially available WiFi signal boosters that operates on 802.11 b/g/n 2.4GHz signals. Configure your WiFi signal booster to connect to the Rain Bird wireless network while the LNK is in AP Hotspot mode as an unsecured network. The amount […]
Rain Bird Irrigation Controllers Compatible with the LNK™ WiFi Module
Look for the “LNK READY” WiFi symbol on a Rain Bird controller to confirm WiFi compatibility. The following Rain Bird controllers are compatible with the LNK WiFi Module: