Your WiFi controller and the Rain Bird app synchronize automatically when your mobile device connects to the controller, and then when changes are made in the app and the “Done” button is selected. There are no additional steps required to synchronize the two. It is important to remember to press “Done” when making any schedule […]
Troubleshooting
Syncing the Rain Bird App and the WiFi Controller Panel
All Zones Watering More Than They Should
When a controller waters all zones more than one time, like watering all of them in sequence and then starts over and does it again, it may be a programming issue. Sometimes there is more than one start time per program when only one start time was intended. Double check all of your start times […]
Controller is Not Watering the Set Run Times
This issue could be caused by the seasonal adjust setting. Double check the setting in the App or at the controller. If the seasonal adjust is less than nominal, the run times will be shortened accordingly. Nominal is 100% for ESP-TM2, ESP-Me controllers, 0% for ST8, ESP-RZXe controllers. In the Rain Bird app you can […]
Watering Even After Turning the Controller Off
If your controller is off and the water keeps running there is an issue with 1 or all the valves or supply lines. When this happens it may be necessary to clean or replace a valve, or to call a contractor. For assistance in getting a contractor referral please call 1-800-RainBird or visit this page: […]
Power Outage and Controller Scheduling
Rain Bird controllers contain a non-volatile memory inside the controller that keeps the programmed watering schedule even without power. If power is lost during an active watering session the controller stops watering and the remaining time on that watering session is cancelled. Once the power turns back on the controller will resume scheduled watering as […]
My WiFi Controller Watered After Rain, Even with a Rain Sensor
Your WiFi controller can make daily watering adjustments when Automatic Seasonal Adjust is on but it does not prevent scheduled watering events, and it may take more than 24 hours for the Automatic Seasonal Adjustment values to reflect actual rainfall. If you recognize there is heavy rainfall and would like to avoid all scheduled watering […]
Backing up the Rain Bird App to Keep Connected WiFi Controllers
You can back up your Rain Bird app, controllers, and settings to Apple iCloud and Google Cloud. iOS: Settings-> Select Apple ID -> iCloud -> iCloud Backup (On) Android: Settings -> Backups (name may vary on different devices) -> Backup (On) (or) Drive (Google Drive App) -> Backups -> <Select device from list> -> Gear/Settings Icon […]
Rain Bird WiFi Controllers Not Compatible with Satellite-based ISPs
Rain Bird WiFi controllers are not compatible with satellite internet service provider modems without advanced network configuration. Rain Bird live support does not provide help for this advanced configuration due to the variability of these systems.
Router Types Supported by Rain Bird WiFi Controllers
Rain Bird WiFi provided through the LNK WiFi module works with any 802.11 b/g/n wireless router networks using 2.4GHz wireless frequency bands. 5.0 GHz is not supported. Security protocols supported include: Open, WEP, WPA-TKIP, WPA-AES, WPA2-TKIP, WPA2-AES, WPA2-AES-TKIP Rain Bird WiFi through the LNK WiFi module is not compatible with satellite internet service providers.
Router Port Compatible with Rain Bird WiFi
Rain Bird WiFi through LNK WiFi module is compatible with Port 80.