Controller is Not Watering the Set Run Times

run times will be shortened accordingly. Nominal is 100% for ESP-TM2, ESP-Me controllers, 0% for ST8, ESP-RZXe controllers. In the Rain Bird app you can see the scheduled versus the…

Sprinkler Manual Watering

…all zones will run the same scheduled time in sequence, a “Program Run”, where you can run all the zones the scheduled time for that program, or “Custom Watering”, where…

Understanding Automatic Seasonal Adjust

…duration automatically changed from 100% to 70%, thus a reduced adjusted run time of 28 minutes. How do I turn off Automatic Seasonal Adjust? If Automatic Seasonal Adjust is active…

FG100 Flow Sensor

run each station for 3-4 minutes to set the expected station flow. When set to Sensor ON, automatic irrigation will be suspended per station if detected flow exceeds learned flow…

All Zones Watering More Than They Should

…issue. Sometimes there is more than one start time per program when only one start time was intended. Double check all of your start times and run times. If you…

Flow Notifications

…Time. Check for water leaks,” then the system detected water running when the controller was not scheduled to run, and there may be a main water line break. The settings…

FG100 Setup in the Rain Bird App

…controller will begin to Learn Flow. It will run each station for 3-4 minutes to set the expected station flow. View and Edit Learned Flow Rates If you have learned…